ReceiptNOWTM Elite User Manual. Happens, disconnect the printer power supply immediately. 30 cuts / min (maximum).

• Record below. Model No Serial No. Date of Purchase Record Coin Box Key Number Key number is on key and/or coin box.

4/99 or to contact a Sears Service before first use of this product. Or PARTS for your dryer. • DRYER SAFETY YOUR SAFETY We have provided many important safety messages in this manual and on your appliance.

Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word 'DANGER'. • INSTALLATION INSTRUCTIONS Read the 'Dryer Safety' section of this Owner's Manual and completely read these Installation Instructions before beginning installation. IMPORTANT: Observe all governing codes and ordinances.

• The dryer must not be installed where it can be exposed to water and/or weather. • GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The power supply cord must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. • Thedryercanbeconnected d irectly t o fuseddisconnect orcircuit b reaker b oxwiththree-wire, flexible armored or non-metallic sheathed c opper c able(withgrounding w ire).

All current-carrying wiresmustbeinsulated. A conduit connector mustbeinstalled atjunction box. Allowfourfeetof slackinthelinesodryercanbemoved ifservicing isevernecessary. 1.Disconnect power. • Strip 3½ inches of outer covering from end of cable. • Alternate Connection: If local codes do not permit the connection of a frame- grounding conductor to the neutral wire: 1. Disconnect power.

Make sure the power supply cord or direct wire cable is in place. Remove the neutral grounding wire (green/yellow wire) from external grounding connector screw. • Local c odesmaypermit t he useofa U.L.-listed, 120/240-volt minimum, 30ampere, dryerpower supply cordkit(pigtail). Power s upply cordshouldbetypeSRD or SRDT andbeat least f ourfeetlong.Thewiresthat connect t othe dryermustendwithringterminals or spade terminals withturned ends. Gp340 programming software drivers. Four-Wire Power Supply Cord (Mobile home or other four-wire installations) For mobile homes or other four-wire installations, the power supply cord must have four, No.-10 copper wires and match a four-wire receptacle of N EMA Type 14-30R.