Volkswagen Passat B5 VCDS Info Updated 21 Dec. Ross-Tech is not responsible for any damage or problems that may result from following these instructions. S7.10 - VAG VDO dashboards by K-line OBDII diagnostic - VW T5, Passat B5, Skoda SuperB and others * 2J74YAUDI - Audi 2J74Y repair software for CarProg.

Loading Volkswagen B5 Passat VCDS Info Volkswagen Passat B5 VCDS Info Updated 21 Dec. 2010 Ross-Tech is not responsible for any damage or problems that may result from following these instructions. They are to be used at your own risk. Specific Modules: -Engine: -- KWP-1281, KWP-2000 VCDS works well with all engines available in the U.S. And most engines that users have tested in overseas markets. See the for any limitations for KWP-2000. Idle Speed Adaptation (see your Repair Manual): With engine warmed up, at idle: [Select] [01 engine] [Adaptation - 10] Enter channel 01 Enter an adaptation value between 124 and 132 [Save] Throttle Body Adaptation: Turn the key on but do not start the car.

[Select] [01 - Engine] [Measuring Blocks - 08] Group 060 or Group 98 [Go!] [Switch to basic settings] Once you do this you will see the top right display say ADP RUN. The TB adaptation is being done as soon as you switch to basic settings. You will see the values change and hear the TB cycle for the first few seconds then it will stop. Leave it in basic mode for about 30 seconds, then switch back to normal settings and you're all set.

Be sure not to touch the accelerator and make sure the engine is NOT running when you do this! Activating Cruise Control on a new ECU (DBW): Factory fresh ECU's often come with cruise control de-activated. [Select] [01 - Engine] [Login - 11] Enter 11463 to activate cruise control [Do It!] -Auto Trans: -- KWP-1281 VCDS works fine -ABS Brakes: -- KWP-1281 VCDS works fine -HVAC: -- KWP-1281 VCDS works fine -Airbags: -- KWP-1281 VCDS Works fine.

-Instruments: K1 -- KWP-1281 VCDS Works fine. - CA N Gateway: -- KWP- 1281 VCDS Works fine.

This is physically located in the Instrument Cluster, but functionally it controls communications on the CAN-BUS. Look at the last digit in the coding. Driver camera axioo pico software tutorial4525507. Add the values for the options together to get the correct coding.

0 - No available equipment +1 - Automatic Transmission +2 - ABS Brakes +4 - Airbags So, if you want to support Automatic Transmission, ABS Brakes, and Airbags, (add 1+2+4 = 7) = 00007. -AWD – Purely Mechanical!

And no, sunglasses do NOT count.

The quattro system in these cars is purely mechanical, no electronics at all. This address is used by the Haldex system used in transverse-engine cars like the TT, the A3, and various Golf/Bora models. - Central Locks: -- KWP- 1281 Only on non-US vehicles with manual crank windows. VCDS Works fine. - Navigation: -- KWP- 1281 VCDS Works fine. - Central Covenience: -- KWP1281 Only on vehicles with power windows.